VTOL and Fixed Wing UAVs, Autopilots, Engines, GCS, Components and Payloads for UAS

Internal Testing of Heavy-Lift Helicopter Rotor Blades

UAVOS' internal tests included ground, hover, and flight evaluations, with ground tests involving the spinning of the blades on whirl towers to measure balance, and initial fatigue tests to determine structural strength By Joe Macey / 04 Mar 2024
UAVOS' Internal Testing of Heavy-Lift Helicopter Rotor Blades
Follow UST

UAVOS has extended its string of successes in developing a two-blade rotor for installation on helicopters with up to 140kg take-off mass and rotor blade diameter of 3200mm.

Designed especially for their heavy-lift helicopter program, the all-composite blades are keen to help meet the requirement to extend aircraft performance at high elevations and temperatures, increase fuel efficiency, and reduce maintenance costs.

The main rotor blades underwent internal tests including ground, hover, and flight evaluations. Ground tests completed have included spinning of the blades on whirl towers to measure balance, and initial fatigue tests to determine structural strength. Blade qualification testing will continue in an independent laboratory to include stress and fatigue tests, additional low and high temperature testing, and ultimate load tests.

To date, the UAVOS team has conducted several test flights with the rotor blades that included hover, traffic pattern flight, and an up-and-away flight to 1000 meters at 100km/h (54 knots).

The carbon main rotor blades are produced with the latest carbon multi-cross-layer technology using a curing oven. Due to gluing an all-metal edging into the leading edge, the blades have increased wear resistance under severe weather conditions, doubling the product’s operating life.

 “Advanced geometric shaping, high-strength composite materials, and a flaw-tolerant design all come into play to provide unmatched performance, reliability, and survivability,” said UAVOS CEO Aliaksei Stratsilatau.

To learn more, contact UAVOS Inc.: Visit Website Send Message View Supplier Profile
Posted by Joe Macey Connect & Contact