Dronetag has launched the second generation of its Remote ID broadcast module for drone pilots called Basic Solution (BS), a module weighing only 0.035 oz (1 gram).
Despite its miniature size, BS is packed with technology offering priceless features for hobby pilots (FPV & RC models).
The BS makes pilots’ lives trouble-free thanks to a thorough mix of unique features: direct integration of the RID module with Spectrum receivers and Betaflight flight controllers; real-time flight logs stored in the hardware flash memory in BS; or synchronization with the Dronetag mobile application, where all flight data can be viewed, exported as logs, or visualized by uploading KML map data to Google Earth or the cloud.
Based on the market and community research, Dronetag crafted the new BS and set up the game-changing deal package, including a wide range of accessories. What is new in the second-generation BS:
- NEW ENCLOSURE OPTION The new enclosure design has a battery slot specifically for the second-generation BS. It adds extra protection, enhances aesthetics, and simplifies attaching the module to the aircraft. The new enclosure turns BS into a completely standalone battery-powered module. There is also a second enclosure option without the battery slot for those who prefer powering their module from any up to 17V power source.
- ANTENNAS NOW INCLUDED Ultra Compact Bluetooth & GNSS Wire antennas are now both included in the package.
- LESS INTERFERENCE Adding SAW filters improves the BS radio interference immunity. This upgrade has a direct impact on GNSS performance, stability, and precision. This improvement is based on the input from FPV pilots who utilize high-power transmitters and have occasionally encountered interference issues.
- IMPROVED POSITION OF LED The LED placed on the BS circuit board’s top side helps check whether the device is ready visually.
- MORE MOUNTING OPTIONS An M1.6 threaded column has been added to simplify mounting a plastic enclosure to the device circuit board. It can also be used for various DIY mounts.
- SOLDER READY As some pilots prefer soldering their own cables instead of using JST connectors, the new BS has solder pads on the bottom side of the circuit board.
- 2-IN-1 SOLUTION FOR POSITIONING AND RID BS now supports both Spektrum XBUS and SRXL2. It can also feed telemetry data to the Betaflight or similar flight controllers via UART, acting as a GPS module while simultaneously broadcasting Remote ID data.
- UNIVERSAL CHARGER FOR THE BATTERY Based on the pilots’ feedback, the new generation BS has a dedicated USB-C battery charger.
- MORE POWER OPTIONS Dronetag BS supports multiple powering options, from the provided battery, drone battery, or any other 5V power source.
Flight Logging & GPS Data Feeds for Spektrum Receivers New features turn BS into a 2-in-1 positioning and Remote ID transmitter, saving pilots valuable payload of their aircraft. Pilots using Spektrum receivers will appreciate extended compatibility – Dronetag BS can feed live GPS data to Spektrum receivers through XBUS and SRXL2, acting as a GPS module. Also, connecting Dronetag BS to the Spektrum telemetry receiver will enable pilots to access live positioning data such as exact location, speed, or height.
Another area that has undergone improvements is log and flight data management. The new BS additionally enables storing flight logs in the device’s internal flash memory and uploading them via Bluetooth to the Dronetag App for flight management right after the landing. The application is available for iOS and Android.
This FAA-Approved Remote ID Solution from a Remote ID leading provider, Dronetag BS, was created for the community of American drone pilots annoyed by the FAA policy forcing them to use Remote ID on their small or custom-made RC models and FPV drones.
The Dronetag BS is compatible with any aircraft offering complete Remote ID compliance for the USA and Europe and other countries where a similar policy is planned or already in action.
Dronetag now offers the BS module as a standalone Combo package with enclosure, battery, charger, and antennas in a time-limited offer for a one-off price of 99 USD. The action package is in stock and ready to be shipped before the FAA deadline on March 16, 2024.
Lukas Brchl, founder and CEO of Dronetag, said; “Compliance has never been our only goal. Throughout the creation process of the second-generation BS, we eagerly delved into the perspectives and desires shared by drone enthusiasts and hobby pilots worldwide.
“We combed through forums, engaged in discussions and closely monitored social media to gain valuable insights into what the drone community truly needs. We then transformed all this knowledge into a hardware component that pushes technological boundaries of the Remote ID market.”
