Embention has launched the Veronte Autopilot 4x 2.2, an upgraded triple-redundant flight control computer for defense drones, civil drones, and eVTOL aircraft that is now available to order.
Building on the existing 4x architecture, the 4x 2.2 retains a Primary, Monitor, and Recovery layout consisting of three independent lanes within a single unit, each equipped with its own guidance, navigation, and control. Compared with the earlier 4x 1.8 version, every subsystem has been upgraded to deliver ten times the processing power and memory alongside dissimilar processors and an enhanced sensor suite.
For power and avionics integration, the unit incorporates dual-channel redundant I/O and power, four power inputs supporting 8 to 54 VDC, native ARINC 429, two TSN Ethernet ports, eight CAN FD buses, and a SAIL Bus. It also integrates ADS-B and Short Range Communications (SRC), with SRC functioning either for swarming and formation flight or as Remote ID in conformity with FAA 14 CFR Part 89 and EU Regulation 2019/945.
To prevent the loss of a harness, connector, or power rail from interrupting flight control, every bus is duplicated across two MIL-DTL-38999 connectors. Aircraft manufacturers can deploy either a single unit or multiple units in a distributed redundancy configuration across platforms ranging from tactical UAS to eVTOL and manned fly-by-wire aircraft. Developed in accordance with DO-178C, DO-254, and ARP4754B with an extended DO-160G environmental qualification, the system is designed for DAL A certification—achieving software DAL A with one unit and hardware DAL A with two units—for FAA Part 23 and Part 25 aircraft, powered lift under EASA SC-VTOL, and certified UAS.
“Certified programs need a flight control computer that is ready for certification from the start. The 4x 2.2 is designed for DAL A, with ten times the processing power for more demanding control laws and custom code, and dissimilar processors with redundant I/O and power for higher reliability,” said Javier Espuch, Chief Business Development Officer at Embention.
Across all three lanes, the hardware runs Veronte platform software while supporting multiple application configurations. Operators can run Veronte flight software, deploy custom C/C++ or Simulink code on a dedicated processor core, or run complete third-party flight software on the Primary lane while Veronte software oversees the Monitor and Recovery lanes. Using Veronte flight software, the unit is ready to fly and configures individual aircraft using control laws derived from Embention’s experience with unconventional aircraft layouts rather than requiring a long custom development process for each airframe, while control laws and intellectual property remain with the aircraft manufacturer in all cases.
For defense programs, Embention manufactures the 4x 2.2 in Spain, the UAE, the US, and Austria using components from trusted supply chains to support NDAA compliance and inclusion on the Blue UAS list. For civil drone operations, the system supports certified and high-SAIL missions, while for eVTOL platforms it provides a fly-by-wire architecture designed for certification.
“The 4x 2.2 brings together 19 years of flight experience with unconventional vehicles and of certification work with authorities. Each improvement in this version comes from lessons learned in flight and in certification programs,” said David Benavente, CEO of Embention.






