Holybro

Holybro is a leading company specializing in the research, development, and manufacture of essential electronic systems for unmanned vehicles, focusing on the best known open-source based autopilots in the world, as well as GPS & RTK systems, telemetry radio, and much more.

Holybro products are trusted by a diverse range of users, from hobbyists and commercial drone manufacturers, to public and private aerospace research institutes and defense organizations worldwide. Our mission is to innovate and deliver high-quality products that meet the highest standards of performance and reliability, serving our customers across the globe.

Our commitment to excellence drives us to collaborate with UAV open-source communities, developers, end-users, and the drone industry worldwide, to meet the needs of the fast-changing world of UAVs while contributing to different open-source projects and standards, such as PX4, Ardupilot, and Pixhawk. Our manufacturing facilities are certified to ISO9001-2015 quality standards.

Drone Autopilots & Flight Controllers

Pixhawk 6X Flight Controller

The Pixhawk 6X features triple-redundant IMU sensors and utilizes a design incorporating completely isolated sensor domains with separate buses and separate power control. A high-speed Ethernet interface allows the unit to be easily integrated into a wide range of drone mission computers.

Pixhawk 6C Flight Controller

Based around an Arm Cortex-M7 CPU, the Pixhawk 6C flight controller features redundant IMUs and comes with PX4 Autopilot pre-installed. With a low-profile form factor, the cost-effective system is ideal for both research and commercial applications.

Pixhawk 6X Pro Flight Controller

The Pixhawk 6X Pro provides triple-redundant IMUs including a main sensor with a high accelerometer dynamic range of ±40 g, as well as dual-redundant barometers. The safety-driven modular design utilizes completely isolated sensor domains with separate buses and separate power control.

Pixhawk Jetson Baseboard

Based on the NVIDIA Jetson Orin NX/Nano carrier board, the Pixhawk Jetson Baseboard can be used with any PAB (Pixhawk Autopilot Bus) form factor flight controller, including our Pixhawk 6X. The baseboard provides a rich set of I/O capabilities, including Gigabit Ethernet, USB, UART, HDMI, and MIPI CSI camera inputs.

Pixhawk RPi CM4 Baseboard

The Pixhawk RPi CM4 Baseboard allows you to combine any PAB (Pixhawk Autopilot Bus) form factor flight controller with a Raspberry Pi CM4 companion computer. A wide variety of I/O connections are provided for ease of use for developers and systems integrators.

Pixhawk 6C Mini Flight Controller

The Pixhawk 6C Mini flight controller is an extra-small form factor version of the 6C, based around the same Arm Cortex-M7 CPU and redundant low-noise IMUs and adding a built-in PWM header while removing some I/O ports. It is ideal for both research and development as well as commercial applications.

Kakute H743-Wing Flight Controller

The Kakute H743 Wing is a full-featured flight controller specifically designed for fixed-wing and VTOL drones. Featuring an Arm Cortex-M7 CPU supporting ArduPilot-based firmware and a high-precision low-noise IMU, it provides a range of I/O including UART, PWM and I2C as well as plug-and-play compatibility with CAN devices and GPS receivers.

Kakute H7 v1.3 Flight Controller

The Kakute H7 v1.3 flight controller provides a wide range of functionality in a miniature footprint of just 35 x 35 mm. It includes integrated Bluetooth, a MicroSD card slot, UART and I2C ports, motor outputs, and compatibility with the DJI/Caddx digital FPV system.

Drone GPS, GNSS & RTK Modules

H-RTK mosaic-H GPS Module

The H-RTK mosaic-H is a state-of-the-art GPS & GNSS module based around an advanced Septentrio receiver with integrated magnetometer and dual-antenna inputs. By utilizing GPS as the yaw source instead of a traditional compass, it provides drone autopilots with more accurate information, thus enhancing navigation performance.

H-RTK Unicore UM982 GPS Module

The H-RTK Unicore UM982 is a dual-antenna RTK-capable GPS module that delivers high-precision positioning information as well as non-magnetometer moving baseline yaw determinations for drone autopilots. It ideal for base station as well as rover applications.

H-RTK F9P GNSS Module Series

H-RTK F9P differential high-precision GNSS modules are based around the u-blox ZED-F9P and offer fast convergence times, reliable performance and fast update rates. The series features three models – a low-cost variant for rover applications, a helical antenna version for rovers or base stations, and a model with a high-gain antenna specifically designed for base stations.

M10 GPS Module

The M10 is a multi-constellation GNSS module powered by the latest-generation u-blox M10 receiver, featuring a high-gain omnidirectional patch antenna and providing accuracy of down to 2 metres. The low-form factor module can be provided with one of three different connectors for versatile integration options.

M9N GPS Module

The M9N is a multi-constellation GNSS module powered by the u-blox M9N receiver, featuring a high-gain omnidirectional patch antenna and providing accuracy of down to 1.5 metres. The low-form factor module can be provided with one of three different connectors for versatile integration options.

DroneCAN H-RTK F9P Rover Module

We offer a DroneCAN version of our H-RTK F9P differential high-precision GNSS module for rover applications, offering enhanced resistance to EMI and an update rate of up to 8 Hz. This model features a low profile with superior ingress protection for rugged and space-constrained drone applications.

DroneCAN H-RTK F9P Helical Module

The DroneCAN version of our helical antenna H-RTK F9P differential high-precision GNSS module offers enhanced resistance to EMI and an up to 8 Hz update rate. This model provides enhanced performance in obstruction-filled environments and is ideal for rover or base station applications.

H-RTK F9P Ultralight Module

The Ultralight version of our H-RTK F9P multi-constellation GNSS module features an integrated helical antenna and weighs just 21.4 grams, making it ideal for even the most weight-restricted drone platforms.