IPET SYSTEM's I7 is an integrated propulsion solution for multirotor drones, featuring a motor with an ESC (electronic speed controller) embedded directly inside the housing for enhanced space and weight savings and reduced wiring. The I7 is designed for quadcopters with takeoff weights of 10 to 14 kg, and hexacopters with takeoff weights of 15 to 21 kg.
The integrated design has been manufactured with high-quality machining and thermo-fit assembly with precision-positioning press technology, ensuring high reliability and a service life designed for 10,000 hours of operation. Benefiting from advanced aerodynamic optimization and parametric blade geometry design, the accompanying I30 propeller is manufactured from integrated carbon fiber, reducing weight while lowering operating noise.
The embedded ESC includes a health monitoring module that tracks real-time operating conditions, with overcurrent, over-temperature, overvoltage, stall and throttle-signal-loss protection for dependable mission performance.
Specifications:
| Propeller Length: | 30” (762 mm) |
| Weight: | 528g (±2%, inc. wires & prop) |
| ESC: | 14S 50A FOC |
| Recommended Battery: | 12 - 14S LiPo |
| Rated Thrust: | 2.5 – 3.5 kg |
| Efficiency at Rated Thrust: | 12.8 g/W (2.6 kg) |
| Max Thrust: | 7.5 kg |
| Motor KV: | 80 |
| IP Rating: | IP46 |
| Propeller: | I30 (integrated carbon fiber, quick-release version) |
| Recommended Ambient Temperature: | -30°C to 65°C |
| Max Voltage: | 61V |
