Stabilizing Gimbals & Stabilized Camera Mounts for Drones & UAVs

Gremsy is a leading manufacturer of camera gimbal stabilizers for drones and unmanned aerial vehicles (UAVs).

Our gimbals, designed for professional aerial filmmakers, mappers and surveyors, support a variety of drones and payloads, and provide the smoothest footage and highest quality results for a range of commercial and industrial applications.

Lightweight Drone Camera Gimbals

Pixy S Drone Camera Gimbal

Industrial gimbal for Sony α7R IV camera & multiple drone platforms

The Pixy S is an industrial drone gimbal designed specifically to carry the full-frame 61MP Sony α7R IV camera.

Ideal for mapping and inspection operations, the versatile gimbal is compatible with a wide variety of drone platforms using the Pixhawk, CubePilot and Skynode autopilots.

The camera is secured within the cage using a unique “slide and lock” mechanism, simplifying setup and requiring balancing only during first installation.

The Pixy S features a new Hotshoe signal connector that allows high-precision image geotagging.

Pixy SM Drone Mapping Gimbal

Precision mapping gimbal for the M300 RTK UAV

Mio Drone Camera Gimbal

Ultra-lightweight and compact drone gimbal

Mio is our next-generation 3-axis drone camera stabilizer, designed for professional UAV systems and commercial & industrial applications.

Weighing just 250g, the small form factor gimbal features a simplified design with two points of contact, resulting in easier setup while still providing excellent stability and vibration resistance.

Mio is compatible with a wide range of cameras weighing up to 400g, including Sony mapping sensors, FLIR infrared sensors and Micasense Rededge multispectral cameras. The versatile system can be mounted on the top, bottom or front of the drone.

The quick release gimbal features a single 20 pin connector for AUX, COM, CAN, SBUS and PPM connections. The AUX port provides up to 8 signals, such as camera triggers or AV signals, for connecting to other external devices.

Learn more: Mio Drone Camera Gimbal

Two-Axis Mio Drone Camera Gimbal

Front-mountable gimbal solution for drone developers

The Two-Axis Mio is an industrial-grade drone gimbal that has been optimized for use with small cameras and sensors. Weighing less than 30% of the original three-axis Mio, it supports front- and top-mounting configurations, making it ideal for applications such as bridge inspection and wind turbine maintenance.

The versatile gimbal is designed with OEMs and developers in mind, featuring an adapter board that provides easy integration into a wide range of drone platforms. The Two-Axis Mio can be equipped with a standard damping accessory that is tailored for seamless front-mounting, ensuring smooth and stable footage during flights. Gremsy can also provide custom damping systems for users with specific requirements.

Learn more: Two-Axis Mio Drone Camera Gimbal

Pixy U Universal Drone Camera Gimbal

Universal gimbal stabilizer for drones

The Pixy U is a compact, ultra-lightweight universal drone gimbal supporting a wide variety of camera mountings for flexible aerial mission capabilities. It features a Hyper-Quick Release system for intuitive and quick connection.

Tilt angle is easily adjustable via Bluetooth, allowing users to quickly switch between different mission requirements.  An inverted mode allows cameras to be mounted on top of the drone to facilitate safe inspection work, while still capturing every accurate detail.

Gremsy’s intuitive gTune software allows pilots to define different profiles for different cameras and easily switch between them, optimizing payload parameters for specific mission objectives. The Pixy U is compatible with Pixhawk UAV autopilots as well as the DJI Matrice 600 flight controller.

Gremsy is currently developing an open Software Development kit that will allow users to develop flexible solutions for commercial and industrial drone aerial imaging applications.

Learn more: Pixy U Universal Drone Camera Gimbal

Pixy F FLIR Drone Camera Gimbal

Compact drone gimbal for FLIR Duo Pro R thermal imager

The Pixy F is a lightweight, palm-sized drone camera stabilizer specifically designed for the FLIR Duo Pro R thermal imaging camera.

Pixy F is fully compatible with Pixhawk UAV flight controllers for seamless attitude synchronisation.

Learn more: Pixy F FLIR Drone Camera Gimbal

Pixy WE Drone Camera Gimbal

Lightweight drone gimbal for the Wiris Enterprise multispectral camera

The Pixy WE is a compact and lightweight drone gimbal designed and optimized specially for the Workswell Wiris Enterprise multi-sensor camera. It can be integrated with the DJI M300 via gPort, as well as with other drone platforms using the Pixhawk or CubePilot flight controllers.

Requiring no balancing, the gimbal can be set up and deployed within seconds. The versatile unit provides a variety of I/O capabilities, including Micro USB, CAN, UART, PPM, Sbus, Spektrum, Bluetooth, and Micro HDMI.

Learn more: Pixy WE Drone Camera Gimbal

Pixy WS Drone Camera Gimbal

Lightweight drone gimbal for the Wiris Security camera

Learn more: Pixy WS Drone Camera Gimbal

Pixy WP Drone Camera Gimbal

Fully integrated drone gimbal for Wiris camera payloads

Learn more: Pixy WP Drone Camera Gimbal

Pixy LR Drone Camera Gimbal

Compact gimbal supporting the Sony ILX-LR1 61 MP camera

The Pixy LR is a lightweight gimbal that has been purpose-built to support the Sony ILX-LR1, a full-frame 61 MP mirrorless camera designed for industrial drone imaging applications requiring superior quality. Featuring powerful stabilization capabilities, it weighs less than 500 grams and is the first Gremsy gimbal to take advantage of USB 3.0.

The compact gimbal supports a range of lens options, and allows lenses to be easily switched out without removing the unit from the aircraft. Pixy LR is compatible with Pixhawk, CubePilot, Skynode, Airpeak and the DJI M600, allowing it to be seamlessly integrated into a wide variety of UAV platforms.

Learn more: Pixy LR Drone Camera Gimbal

G-Hadron Drone Gimbal

Gimbal optimized for Teledyne FLIR Hadron 640R visible & thermal camera

The G-Hadron is a compact and lightweight gimbal that provides drone operators and systems integrators with a solution for seamlessly integrating the Teledyne FLIR Hadron 640R dual-camera module into their platforms.

The gimbal provides plug-and-play compatibility and exceptional stability for the thermal and visible imaging module, and supports Pixhawk, CubePilot and Skynode flight controllers. It can be provided with a standard damping system, or we can custom-engineer a tailored solution to meet your precise requirements.

Learn more: G-Hadron Drone Gimbal

Mid-size Drone Camera Gimbals

Gremsy PE Drone Camera Gimbal

Auterion & MAVlink compliant drone gimbal

The Gremsy PE family has been specially designed for effortless integration with Auterion and MAVlink-compliant drones, featuring seamless compatibility with the Skynode drone ecosystem. Adhering to the Pixhawk Payload Bus standard, the quick-release gimbals also allow plug-and-play operation with most Pixhawk-based platforms.

The PE hub provides an intuitive I/O interface with a variety of ports including power, CAN, serial, Ethernet and USB-C, allowing easy connection with your flight controller system, companion computer and other peripherals.

Gremsy PE is now available in two models: T3 PE and Pixy PE. Both gimbals support similar cameras to their standard versions, offering a variety of payload options to suit a wide range of requirements.

Gremsy S1 (V3) Industrial Drone Gimbal

Industrial-grade drone gimbal designed for thermal imaging

The Gremsy S1 (V3) is a small, lightweight single-arm drone gimbal specially designed for industrial-grade thermal imaging and other aerial mapping and inspection applications. The gimbal is compatible with a wide range of UAVs and features full support for the FLIR Duo Pro R drone thermal camera, as well as compatibility with leading sensor models from Sony, TeAx, Wiris and more.

The gimbal’s Hyper Quick Release functionality enables easy push-and-twist connection and hot-swapping within seconds. I/O capabilities, including USB, serial, CAN, SBUS and a 9-signal auxiliary port for extra camera control functionality, are all located on the Hyper Quick Release mechanism for quick and intuitive connection.

The S1 features a smart mapping mode, with a user-defined home position that aligns the camera with the forward position of the drone and tilted down 90 degrees. Built-in Bluetooth functionality allows users to conveniently control the gimbal via smartphone, tablet or other suitable devices.

This upgraded version of the Gremsy S1 gimbal benefits from a 20% increase in motor power for enhanced stability, and a pan rotation range increased from ± 160° to ± 345°.

Learn more: Gremsy S1.v3 Industrial Drone Gimbal

Gremsy T7 Heavy-Lift Drone Gimbal

Multi-camera gimbal for industrial drones

The Gremsy T7 is a robust gimbal designed for heavy-lift industrial drones. Featuring a carrying capacity of 7 lbs, the T7 can be fitted with an optional extra camera slide for versatile multi-sensor operation. Built-in HDMI Hyper Quick Release functionality enables connection with just a push and twist-lock movement, allowing hot-swapping within seconds as well as the ability to withstand thousands of mating cycles.

With a large camera cage, the T7 is compatible with a wide range of cameras and payloads from leading manufacturers such as Phase One, Workswell and Senop. The powerful motor enables high-performance handling of even large and heavy cameras.

I/O capabilities, all located on the Hyper Quick Release mechanism for quick and intuitive connection, include USB, serial, CAN, SBUS and a 9-signal auxiliary port for functions such as camera trigger, PWM control and AV signals. Integrated Bluetooth functionality allows convenient control of the T7 gimbal via smartphone, tablet or other suitable device.

Learn more: Gremsy T7 Heavy-Lift Drone Gimbal

Gremsy T3 Lightweight Drone Gimbal

Lightweight drone camera stabilizing gimbal with rapid setup

The Gremsy T3 (V3) is a lightweight 3-axis camera stabilizing gimbal, featuring HDMI Hyper Quick Release functionality that enables connection with just a push and twist-lock movement. Tool-free balancing and easy plug-and-play installation allow operators to set up cameras and be ready to fly within seconds.

The T3 can receive power directly from the drone battery, and the gimbal’s integrated 14.5V regulator allows you to power other auxiliary systems such as third party flight controllers, remote control systems and other accessories.

I/O capabilities, all located on the Hyper Quick Release mechanism for quick and intuitive connection, include USB, serial, CAN, SBUS and a 9-signal auxiliary port for functions such as camera trigger, PWM control and AV signals. Integrated Bluetooth functionality allows convenient control of the T3 gimbal via smartphone, tablet or other suitable device.

An integrated temperature-controlled and heated IMU, inside an aluminium housing, provides high-accuracy operation even in extreme temperature conditions. Gremsy’s gMotion controller provides professional-level stabilization with 32-bit resolution and correction updates at up to 2000 Hz, resulting in smoother, superior-quality footage.

Learn more: Gremsy T3 Lightweight Drone Gimbal

Heavy-lift Camera Gimbals

Aevo features an advanced quick-release system that provides convenient passage of power and control signals for both gimbal and camera, with interfaces including USB 2.0, CAN, UART, S-bus, Spektrum, PPM, and Bluetooth 4.0.

Learn more: Gremsy Aevo Drone Camera Gimbal

Gremsy H16 Drone Camera Stabilizing Gimbal

Advanced drone camera stabilizer for professional filmmaking

The Gremsy H16 is a state-of-the-art drone camera stabilizing gimbal for professional aerial filmmaking applications. Built from carbon fibre and aircraft-grade aluminium, the lightweight but solid gimbal system is designed for even the most extreme environments.

Incorporating powerful direct-drive hollow-shaft motors with ultra-high resolution, the H16 provides precision control for supreme accuracy and incredibly smooth footage.

The built-in precisely calibrated IMU sensor features an innovative auto-bias tracking algorithm that improves gyro bias stability over time.

The flexible, easily adjustable camera cage, with a quick-release design for easy installation and swapping, allows the H16 to carry a wide range of leading payloads up to 16 lbs in weight, including cameras from Sony, Canon, Nikon, Panasonic and RED.

Accessories for the H16 include a vibration damping kit, a 360-degree landing gear and a circular quick-release attachment. An intuitive app, available for both Android and iOS, allows drone pilots to easily access and modify gimbal settings via Wi-Fi.

Learn more: Gremsy H16 drone camera stabilizing gimbal

Zoom Payloads

Zio Gimballed 4k Camera Payload

High-resolution stabilized camera payload for survey & inspection

The lightweight payload features MAVLink support and can be seamlessly integrated with PX4 and Ardupilot-powered drones. Video can be streamed to your ground control station via HDMI and Ethernet.

Learn more: Zio Gimballed 4k Camera Payload

Custom Gimbal Solutions

As a world-leading manufacturer of camera stabilizers, we offer flexible custom gimbal solutions to accommodate your specific requirements. With more than 10 years of experience in the gimbal and drone industry, and our in-house capabilities from designing to manufacturing, we can create your custom solution from scratch or redesign it based on our existing gimbal platforms. Our customized drone gimbals are highly adaptable for demanding cinematic and industrial applications.

We are proud to develop custom drone gimbals with world-leading camera and drone manufacturers, including Sony, Phase One, and Acecore.

More information: Custom Drone Gimbals >>