The Vector Technics 10025 PRO is a 160 Kv electric motor developed for multirotor UAV platforms requiring more than 20 kg of thrust from an individual propulsion unit. Operating across a 44–50 V range for 12S LiPo architectures, the 1,030 g motor combines a 112 mm diameter format with a maximum continuous power rating of 4,070 W for 180 seconds. Its 36-slot, 42-pole configuration, dual sealed bearings, and 30–34 in propeller compatibility support integration into large multirotor propulsion systems intended for substantial payload carriage.
For cargo UAVs and other heavy-lift airframes in the 50 kg+ platform class, the 10025 PRO provides thrust performance extending beyond 20 kg per motor under the tested propeller configurations. With the MZ 30 × 10 CF_FX propeller, measured thrust reached 24.586 kg at full throttle, while the TM 30 × 10.5 CF_FX configuration produced 24.590 kg. The motor also incorporates a 30 mm protruding shaft, a four-point M5 mounting pattern on a 50 mm PCD, and dedicated M3 and M4 propeller mounting interfaces for propulsion-system installation.
| Motor velocity constant: | 160 RPM/V |
| Voltage range: | 44–50 V (12S LiPo) |
| Maximum continuous current: | 89 A (180 s) |
| Maximum continuous power: | 4,070 W (180 s) |
| Motor weight: | 1,030 g ±2% |
| Motor diameter: | 112 mm |
| Motor length: | 52.7 mm |
| Compatible propeller size: | 30–34 in |
| Stator / magnetic poles: | 36 S / 42 P |
| Bearings: | Dual 6902-2Z sealed |
