Heavy Fuel, Gasoline Engines & Wankel Rotary UAV Engines
SP-180 HF SRE Hybrid UAV Wankel Engine Heavy Fuel Hybrid Wankel Rotary Engine for UAV
SP-180 HF SRE Hybrid UAV Wankel Engine

Heavy Fuel Hybrid Wankel Rotary Engine for UAV

Visit Website Send Message
Saved
Save
SP-180 HF SRE Hybrid UAV Wankel Engine

The heavy fuel SP-180 HF SRE is a hybrid single rotary engine with 180 ccm combustion chamber and a directly attached starter generator.

The SP-180 hybrid wankel engine is the flagship of the Sky Power propulsion portfolio. This wankel propulsion system has class leading performance figures that are achieved through a complex patented internal clean sheet design, centered around the single cylinder 180ccm configuration. Due to the nature of wankel, this propulsion system is exceptionally light and has a much smaller space envelope than the comparative two stroke equivalent. Minimal radial or torsional vibrations make this engine specifically compatible with high powered optics or sensors.

The ability to mount this engine at 90 degrees (vertically) adds to the user flexibility – suited to helicopter applications. The engine has an integrated starter generator, which allows the wankel to have several different operating functions:

  • Mechanical only: up to 22kW mechanical shaft power as primary form of propulsion
  • Mechanical and electrical (hybrid): combination of both electrical and mechanical propulsion.
  • Power generation (onboard battery pack required): The wankel is providing power to the generator system and it is the electrical output that is used as the primary form of propulsion.
  • Hybrid boost mode: Combination of both mechanical and electrical simultaneously for maximum performance

Another feature of this integrated hybrid technology is to act as a form of redundancy, to allow for emergency decent in the event of a critical scenario.

The SP-180 has a proven water-cooled housing and oil cooling of the rotor. Predictable maintenance minimizes the engine down time, meaning greater operational capacity.

Type Rotary engine
Capacity 180 ccm / 10.98 cu in
Power 23 HP / 17.1 KW @ 6000 RPM Combustion power up to 23 HP / 15 KW Electrical power *power is depending on cooling concept
Speed Range 2000 – 6000 RPM
Weight 24.25 lbs (11.0 kg) (excluding accessories)
Oil/Gasoline ratio 1:50 / 2% mix
Cooling water cooled housing & oil rotor cooling (active cooling)
Torque 27.5 Nm @ 5500 RPM