The GS2L Ground Station with Linux is a fixed ground-based receiver designed to support the safe integration of unmanned aircraft into shared airspace. It combines omni-directional ADS-B and FLARM reception with BLE and Wi-Fi Remote ID monitoring, alongside an onboard multi-constellation GNSS sensor for high positional accuracy. Integrated LTE connectivity enables data transmission in LTE and 4G-rich environments without additional cabling, making the system suitable for permanent deployment in open or remote locations. The unit is enclosed in an IP67-rated housing and is supplied with all required cables and antennas for straightforward installation in demanding outdoor conditions.
Built around a single-board computer running a Linux operating system, the GS2L offers substantial processing capability, memory, and expansion potential. Power is supplied using Power over Ethernet, allowing cable runs of up to 100 meters while maintaining data transfer over the same Ethernet connection. The system supports VLOS and BVLOS operations where continuous airspace awareness is critical and can accommodate up to four RF modules in various combinations, including GNSS, Remote ID, ADS-B, FLARM, and UAT. Optional accessories support mobile and fixed installations, while licensing requirements for FLARM operation are supported directly at purchase. A mobile version is also available, including a tripod and transport case for rapid field deployment.
Specifications:
| First Band: | ADS-B 1090 MHz |
| Second Band: | FLARM 868 MHz |
| Third Band: | BLE 2400 MHz |
| Fourth Band: | Wi-Fi 2400 MHz |
| Sensitivity (ADS-B): | -94 dBm |
| Sensitivity (FLARM): | -109 dBm |
| Sensitivity (BLE): | -103 dBm |
| Sensitivity (Wi-Fi): | -103 dBm |
| Integrated GNSS: | Multi-constellation GNSS sensor for best accuracy |
| LTE: | LTE Cat. 1 data transport layer (global bands) |
| Dimensions: | 170 x 170 x 100 mm |
| Weight (module only): | 0.5 kg (without cables and antennas) |
| Weight (installed): | 2.5 kg (with cables, arm, and antennas) |
| Power Consumption: | 3.5 W |
| Power Supply: | 100-240 VAC with PoE, or 24 VDC with AC/DC converter |
| Ingress Protection: | IP67-rated enclosure |
| Ethernet: | Standard Ethernet 10/100 |
