The Revector Detector IMSI Catcher MPS 3.0 system provides detection, tracking and control of 2G, 3G and 4G mobile phones, and is ideal for law enforcement, military and security personnel, and search and rescue teams. Featuring two dual-radio SDRs for a total of four simultaneous channels, it enables more devices to be detected simultaneously, and also provides enhanced performance for advanced features such as cell catch mode and downgrading to 2G/3G.
The low-SWaP unit establishes a new mobile phone cell site, encouraging all GSM, UTMS and LTE devices in the area to connect. Once a target device is connected, the Revector Detector system can extract and record all IMSI, IMEI and TSMI data from devices in range, providing GPS location and timestamp. It also provides a wide range of additional capabilities to the operator, including:
- Tactical mapping for immediate location of device
- Active route mapping
- Redirecting target device to GSM/UTMS/LTE
- Spoofing inbound SMS or call to captured target phone
- Monitoring outbound SMS or call attempts
- Alerts on predefined suspect IMSI or IMEI
- GPS location and time/date stamp for all data
- Silent call & direction-finding on all technologies
- Selective jamming (denial of service) of target devices
- Specific target blocking
- Target battery draining
- Central control management via UAV uplink
- Distance information on target UE
- Emergency call override
- Voice channel to target device
Specifications:
Dimensions: | 370 x 235 x 125 mm |
Weight: | 10.6 kg |
Power: | Hot-swappable Li-ion batteries |
RF Output Power: | Up to 5W per channel |
Receiver Sensitivity: | < -120 dBm |
SDR Frequency Range: | 400 MHz - 3GHz |