High Energy Density Silicon Anode Li-ion Batteries

Innovative Battery Technology Released for Electric Aviation

Amprius has unveiled a ultra-high-power, high-energy lithium-ion battery thought to be a significant advancement for electric uncrewed aerial systems, with a discharge rate of 10C whilst delivering 400 Wh/kg energy density By Sarah Simpson / 08 Aug 2023
Innovative Battery Technology Released for Electric Aviation
Follow UST

Amprius Technologies, a leader in next-generation lithium-ion batteries with its Silicon Anode Platform, is continuing to pioneer innovative battery technology with its newest ultra-high-power high-energy lithium-ion battery.

Leveraging the company’s advanced material system capability, the cell achieves a discharge rate of 10C, while delivering 400 Wh/kg energy density, a major advancement for electric aviation encompassing both crewed and uncrewed aerial systems – a market projected to be collectively over $49 billion USD by 2025.

The cell’s extraordinary power output brings unprecedented benefits to the electric vertical takeoff and landing aircraft (eVTOL) and unmanned aerial vehicle (UAV) industries, providing what Amprius reports to be unmatched propulsion power and energy to meet the rigorous demands during takeoff, cruise, and landing.

Thought to extend flight range by as much as 50% and increase payload capacity, the new cell’s groundbreaking capabilities extend to high-performance EVs, potentially enabling them to achieve 0 to 60 mph (0 to 97 km/h) acceleration below 1.5-seconds, redefining performance standards in the EV industry, projected to reach $67B by 2025.

“Commercial opportunities in electric mobility are profoundly impacted by their power and energy requirements,” said Dr. Kang Sun, Chief Executive Officer of Amprius. “Our new cell delivers impressive specific power and energy density performance, approximately 200% higher than traditional graphite cells, while achieving a 10C discharge rate, significantly expanding application possibilities and driving cost-effectiveness.”

With an impressive power density of 3500 W/kg in standard discharge conditions, and a maximum power exceeding 4400 W/kg at lower depths-of-discharge, the cell’s usable discharge capability is extended. It supports high current pulses at low states of charge without going below the lower cut-off voltage, namely 3000 W/kg at 30% depths-of-discharge. The combination of high energy density and high-power density reduces battery weight and volume, leading to extended range, reduced charging frequency, and lower operating costs.

In addition, the new ultra-high-power cell boasts an ultra-fast charging (UFC) capability, reaching 80 percent charge in approximately six minutes or less, transforming mission-critical operations with swift turnaround times.

Amprius is dedicated to providing batteries that are a key component required to advance electric mobility and expects to have samples of this cell available for customers by the end of 2023 with the commercialization of the new cells slated for early 2024.

To learn more, contact Amprius Technologies: Visit Website Send Message View Supplier Profile
Posted by Sarah Simpson Specialising in digital copy Sarah is an experienced copywriter and researcher. Working with Unmanned Systems Technology Sarah has developed a passion for sourcing unique digital content and a talent for writing about the latest technical innovations in the unmanned sector. Connect & Contact
More from Amprius Technologies