Autonomous Fixed-Wing VTOL UAV and Indoor Drones for Inspections & Mapping

Autonomous Fixed-Wing VTOL UAV and Indoor Drones for Inspections & Mapping
Skandu iela 7, Riga, LV-1067 Latvia Latvia Regional offices
+371 66 77-77-17

FIXAR is a leading developer of professional drones and UAV (unmanned aerial vehicle) platforms for commercial and industrial applications. With advanced in-house R&D capabilities, we develop proprietary drone hardware and software to create state-of the-art solutions for a wide range of industries, including aerial imaging, precision agriculture, oil and gas, surveillance and monitoring, and more.

FIXAR 007 Fixed-Wing VTOL UAV

Autonomous hybrid drone for professional operations

hybrid vtol uavThe FIXAR 007 is a fully autonomous, fixed-wing VTOL (vertical take-off and landing) UAV designed to meet the needs of a wide variety of commercial and industrial applications, such as mapping and inspections.

The low-maintenance, easy-to-use platform can be set up in less than five minutes, and can take-off and land vertically with one-metre accuracy, requiring no special launch area preparations.

FIXAR 007 fixed wing hybrid vtol

Advanced proprietary components and technologies

Developed in-house, the UAV utilises our patented Fixed Angle Rotor system for seamless transitions to forward flight and enhanced efficiency due to all motors being in use. This design also features fewer moving parts and thus fewer points of failure. The proprietary FIXAR embedded autopilot provides complete autonomy and the utmost in safe operation with minimal human intervention.
FIXAR xGroundControl Station autonomous uav software
We have also developed our own ground control station software for the FIXAR 007. xGroundControl Software provides intuitive mission planning and flight control with local offline operation and the ability to upload 3D maps.

Versatile multi-sensor capability

With a payload capacity of 2kg (4.4lbs) and a spacious modular payload pay, the FIXAR 007 VTOL UAV can be equipped with a wide variety of sensors, and can accommodate multiple payloads at once to accomplish your mission objectives in fewer flights.FIXAR 007 Sensors

FIXAR 007 industrial uav payload module

Possible payload combinations include arrays of RBG cameras for ultra-high resolution mapping, RGB and multi-spectral sensors, LiDAR, gas and radiation sensors.

Our proprietary software makes it easy to integrate almost any COTS sensor on the market.

The drone’s integrated autopilot provides a 2-channel power supply of up to 12V/2A per channel, and send control signals to carry out camera and sensor functions at predetermined positions. All data is stored for later post-production processing.

Competitive advantages

The FIXAR 007’s patented hybrid design combines the take-off and landing manoeuvrability of multirotor drones with the increased payload capacity and endurance of fixed-wing UAVs. The versatility of the unmanned aircraft allows it to handle a range of use cases – from mapping and surveying to last-mile delivery and stockpile management – thus doing away with the need for multiple platforms.

FIXAR 007 vtol mapping drone

Other advantages of the FIXAR 007 include:

  • High manoeuvrability, including hovering mode
  • Resistance to severe weather conditions
  • Robust control and failsafe operation with proprietary autopilot
  • Autonomous take-off & landing even in rough terrain
  • Protection from strong electromagnetic fields
  • No need for bulky launchers or capture devices
  • Equipped with mission’s data logging system – FIXAR BlackBox

Comprehensive maintenance and technical support

Fixar Professional drone solutionAs part of an end-to-end UAS solution, the FIXAR 007 package includes a free two-day training course and online certification, which covers all the essential information needed to operate the drone.

The package also includes a warranty period of 12 months or 80 flights from date of customer receipt. During this period, we will provide free service and support to repair any damage or malfunction covered by the warranty.


Wingspan 1540 mm
Weight (in case with equipment) 23 kg
Max payload 2 kg
Max take-off weight 7 kg
Speed 27 m/s max, 19 m/s cruising
Max flight time 60 mins
Maximum flight distance 60 km
Wind resistance (vertical flight) 12 m/s

More information: FIXAR 007 Fixed-Wing VTOL UAV

FIXAR 025 Fixed-Wing eVTOL UAV

Autonomous fully-electric hybrid drones for BVLOS and long-range missions

FIXAR 025 Fixed-Wing VTOL UAVThe FIXAR 025 is a fully-electric autonomous UAV designed for long-range and BVLOS (beyond visual line of sight) commercial and industrial applications including mapping, aerial imaging, surveillance, inspection and monitoring, and more.

The versatile platform can be equipped with a variety of easily-swapped payload modules as well as third-party sensors, allowing one aircraft to perform a range of different missions and providing maximum return on investment.

The UAV is also equipped with a patented safety system that secures all sensors as well as the built-in BlackBox data backup system.

The FIXAR 025 features a lifting body aircraft design that maximizes efficiency and flight endurance, and can carry up to 10 kg (22 lbs) of payload for distances of up to 300 km (186 mi) on a single battery charge. With no additional launch or recovery equipment required, the aircraft can be operated from an extremely low footprint and can be deployed easily and rapidly.

The FIXAR 025 has been designed to support integration with AI solutions as well as unmanned traffic management (UTM) ecosystems anywhere in the world.

The closed-source software allows to build and edit a flight mission and monitor missions in real-time using 3D visualization for one or multiple drones simultaneously. The software has automated mission planning and data flow to make the process even easier and faster.

Already self-proven in operations with FIXAR 007, the improved proprietary autopilot software version 2.0 provides an autonomous flight. It is also protected against confidential data breaches and is now compatible with AI and LTE.


Wingspan 2800 mm (9.2 ft)
MTOW 25 kg (55 lbs)
Max payload 10 kg (22 lbs)
Cruise speed 85 km/h (52.8 mph)
Max flight time 3.5 hrs
Maximum flight distance 300 km (186 mi)
Maximum altitude 5000 m (16 404 ft) ASL

More information: FIXAR 025 Fixed-Wing VTOL UAV


Multirotor inspection drone for INDOOR mapping

Fixar Indoor inspection droneFIXAR INDOOR is a multirotor drone designed for inspection, monitoring and mapping of indoor and confined spaces such as mines, cellars, warehouses and abandoned buildings.

The inspection drone features a main and rear camera with seamless switching between the two for detailed imaging. The system’s real-time video transmission provides a reliable and high-quality signal even through complex reinforced concrete structures.

With a rugged collision- and fall-resistant body, the drone is equipped with a suite of active and passive safety features that minimise the risk of damage to property and people, including a four-way LiDAR obstacle detection system, infrared sensors, strobe lights, and additional custom options.

FIXAR INDOOR provides a range of other benefits, including:

  • Enhanced personnel safety when inspecting potentially hazardous areas
  • Completes visual inspections in rapid timeframes
  • VTOL operation is ideal for indoor operation
  • Simple and customizable design for versatility and low maintenance requirements
  • Dust- and moisture-proof
  • Operates under no-light conditions

FIXAR is working on improvement of current solution. If you are interested in the FIXAR INDOOR solution and would like to contribute to its development, please contact us to get more information.

More information: FIXAR Indoor Drone

FIXAR Use Cases

FIXAR professional drones deliver all-in-one elegant UAV solutions to meet your needs for a variety of commercial applications, including videography, photography, surveying, cartography, 3D mapping, monitoring, surveillance, education, delivery, and many others. View use cases >

Watch our use case as we conquer Elbrus:

Learn about our last-mile delivery pilot project with Jysk:

+ Load More Articles
Regional Offices & Locations
FIXAR Latvia Skandu iela 7, Riga, LV-1067 Latvia +371 66 77-77-17
Sorry, the FIXAR profile is not currently available Take a look at other relevant suppliers in: