University of Michigan Announces New Outdoor Drone Testing Facility

By Mike Ball / 31 Jul 2017
Follow UST

University of Michigan M-Air drone testing lab

The University of Michigan has announced that it is developing an outdoor fly lab for testing autonomous aerial vehicles for its College of Engineering, adding to the university’s spate of advanced robotics facilities. The facility, know as M-Air, will be a netted, four-story complex. Construction of the $800,000 M-Air is expected to begin in August and be complete by the end of the year.

“M-Air will allow us to push the edge of our algorithms and equipment in a safe way, where the worst that can happen is it falls from the sky,” said Ella Atkins, professor of aerospace engineering. “With this facility, we can pursue aggressive educational and research flight projects that involve high risk of fly-away or loss-of-control—and in realistic wind, lighting and sensor conditions.”

Autonomous aerial vehicles have a broad range of applications. Large ones can be used for commercial transport and national security, while small drones could survey disaster sites, inspect infrastructure like bridges and wind turbines, gather environmental and atmospheric data, and deliver packages.

“You could travel over a disaster site, or a farm,” Atkins said. “Small drones can go places that are very hard or dangerous to get to, and fairly quickly because they don’t need roads.”

Currently, the Federal Aviation Administration allows researchers to fly drones outside at low altitude as long as the operator can see the aircraft and immediately ground it in an emergency. Outdoor drone flights on U-M’s Ann Arbor campus need to go through a formal university approval process due to safety concerns about interference with hospital helicopters and other aircraft. Flights in M-Air will be considered indoors and won’t require this level of approval.

“The FAA regulations don’t guarantee safety,” Atkins said. “They’re intended for responsible, experienced pilots, and on more tested systems. Our students aren’t experienced pilots. They, and our faculty members, are building new hardware that’s not necessarily going to work the first, second, third, or even the fourth time.”

Researchers often use tethers to try out their newest technologies, but that can be limiting. Without a net or a tether, a cutting-edge prototype could hit a car or a person.

“We’re giving our students and faculty the most comprehensive, safe testing facilities possible for these vehicles, which hold great promise for a wide range of applications,” said S. Jack Hu, U-M vice president for research and the J. Reid and Polly Anderson Professor of Manufacturing in the Department of Mechanical Engineering.

M-Air will be located near a complementary indoor space. Next door, the Ford Motor Company Robotics Building will hold a three-story fly zone where drones can perch on walls or ceilings and interact with the environment. Together, the labs allow for a full spectrum of experiments with one or several drones. Researchers will be able to test unique control and sensing schemes, cooperative control, human-robot interaction, and novel missions, Atkins said.

“When M-Air opens, Michigan Engineering will be the only engineering school in the country — perhaps in the world — with access to cutting-edge robotic test facilities for air, sea and land,” said Alec Gallimore, the Robert J. Vlasic Dean of Engineering and a professor of aerospace engineering. “This is a key piece in our long-term plan to give our faculty and students best-in-class resources as they work to solve society’s greatest challenges and most exciting opportunities.”

The outdoor fly lab will be down the road from U-M’s one-of-a-kind Mcity Test Facility, a simulated urban and suburban environment where academic and industry researchers test autonomous and connected cars and trucks. The college is also home to the Marine Hydrodynamics Lab, which houses a 360-foot-long indoor body of water for testing robotic and conventional watercraft.

M-Air is funded by Michigan Engineering and the U-M Office of Research. With 9,600 gross square feet, M-Air will have an 80-by-120 footprint, and it will stand 50 feet high at the northwest corner of Hayward Street and Draper Road. A pavilion for up to 25 people will comfortably host users. The M-Air floor will be grass, and its walls black polyester netting held in place with structural steel poles. Adjustable lighting will make it useable in the evening.

“From an aerial robotics education perspective, this facility is enabling the notion of, ‘If you can imagine it, you can try it out,'” Atkins said.

Posted by Mike Ball Mike Ball is our resident technical editor here at Unmanned Systems Technology. Combining his passion for teaching, advanced engineering and all things unmanned, Mike keeps a watchful eye over everything related to the unmanned technical sector. With over 10 years’ experience in the unmanned field and a degree in engineering, Mike’s been heading up our technical team here for the last 8 years. Connect & Contact

Latest Articles

Nationwide UTM Network to be Implemented in Norway

Thales has partnered with Avinor to deploy a safe and scalable digital platform for automated UTM as well as future AAM operations

Jan 13, 2025
Multi-Use BVLOS Drone Dock Network Launched

A2Z Drone Delivery’s new multi-use drone dock network achieves BVLOS with a single operator managing multiple drones, marking the company’s first drone service deployment

Jan 13, 2025
Combining Batteries & Fuel Cell Technology to Enhance Long-Range UAS Operations

Edge Autonomy is enhancing UAS capabilities by combining advanced batteries with its innovative MT-SOFC fuel cell technology, offering endurance, stealth, and operational flexibility for evolving mission demands

Jan 13, 2025
Protecting Drone Electronics with SCS PrecisionCoat VI Underfill & Potting

Specialty Coating Systems (SCS) outlines the capabilities of its PrecisionCoat VI system, designed to automate underfill and potting material applications, enhancing production efficiency and ensuring precision in drone electronics manufacturing

Jan 13, 2025
Effective and Reliable Jam-Resistant GPS: Meteksan’s AGNOSIS GNSS

Explore Meteksan Defence's advanced GNSS anti-jamming and anti-spoofing solutions, including their AGNOSIS system, designed to protect military platforms from signal interference in modern warfare

Jan 13, 2025
Understanding GNSS Correction Methods

CHCNAV delves into the main GNSS correction techniques, their characteristics, and applications to help make informed choices for specific requirements

Jan 13, 2025

Featured Content

New Safety System Unveiled for Anzu Raptor Drones

ParaZero has launched the SafeAir Raptor, a parachute safety system for Anzu Robotics’ Raptor and Raptor T drone models that complies with ASTM F3322-22 standards

Jan 08, 2025
How ANELLO’s Disruptive SiPhOG™ Technology is Shaping the Future of Precision Navigation

UST sits down with Dr. Mario Paniccia, CEO at ANELLO Photonics, to learn how Silicon Photonics Optical Gyroscope technology is empowering autonomous systems with cutting-edge navigation solutions

Jan 06, 2025
XPONENTIAL Europe Highlights Autonomous Robotics for Perimeter Security

XPONENTIAL Europe, held in Düsseldorf from 18-20 February 2025, will focus on uncrewed systems and highlight their use for protecting critical infrastructure

Jan 02, 2025
Software-Defined Networking Capability Selected for Attritable Autonomous Systems

Viasat will provide its NetAgility SDN system in support of the US DoD's Replicator initiative

Dec 24, 2024
Assured PNT Solution Released for RF Protection

The new GAJT-310 from NovAtel is the company’s latest battle-proven low SWaP GNSS Anti-Jam Technology, designed for unmanned systems on land, in the air, or at sea

Dec 20, 2024
New AI-Powered Drone-in-a-Box Solution for First Responders & Mission-Critical Industries

The solution integrates Nokia Drone Networks with Motorola Solutions’ CAPE drone software for navigation and obstacle avoidance

Dec 16, 2024