Single Board Computer Solutions for Unmanned Systems


Micro/sys is a provider of embedded microprocessor control and connectivity solutions to Original Equipment Manufacturers (OEMs). Our integrated systems feature a wide range of processors as well as supporting peripheral and I/O products, and support open standards wherever possible, for maximum flexibility and ease of development.

Our products meet the requirements of a wide variety of industries and embedded applications, from automated manufacturing through to communications or computer vision on-board unmanned aircraft or other military vehicles.

Micro/sys Products

SBC4661 Single Board Computer

I.MX6 ARM Quad Core Cortex-A9 StackableUSB™ Computer

The SBC4661 single-board computer is powered by a 1GHz Quad-Core Cortex-A9 processor, augmented by an ARM NEON GPU as well as a fully configurable Kintex-7 FPGA for users’ specific firmware needs.

The SBC4661 is ideal for computer vision and multimedia applications, incorporating HDMI, LVDS panel and 24-bit flat panel display outputs, NTSC and PAL camera inputs, as well as software support for camera interfaces such as USB3Vision, GigEVision, CamerLink, and CoaXPress.

A variety of expansion, connection and communication needs are taken care of, with options including RS232/RS485 serial, USB3.0, StackableUSB and Ethernet interfaces.

More information: SBC4661 Single Board Computer

SBC4661 Single Board Computer

SBC5651 Single Board Computer

i.MX515 ARM© Cortex©-A8 StackableUSB™ Pico-ITX Computer

The SBC5651 single-board computer is designed for low-power embedded applications such as small medical devices, data collection, and test and measurement. Vision applications are also catered for with the inclusion of a programmable CMOS camera port interfaced directly to the CPU.

The board features a Pico-ITX form factor, ARM Cortex-A8 800MHz processor and capacity for up to 512MB of DDR2 SDRAM. Communication capabilities include three high-speed USB2.0 ports, one Full-Speed On-the-Go USB2 port, one Ethernet port and CAN Bus, and low-speed devices can be connected via three RS232/RS485 serial ports.

Sub-1W power requirements are achievable thanks to programmable clock rates and advanced power management features. The SBC5651 can be powered via an external 5VDC source, a single cell Li-Ion battery, or the on-board mini-AB USB power connector or StackableUSB connector.

More information: SBC5651 Single Board Computer

SBC5651 Single Board Computer

SBC1654 Single Board Computer

i.MX515 ARM Cortex-A8 Computer with Spartan-6 FPGA
and MIPI CSI CMOS Camera Interfaces

The SBC1654 single-board computer is optimized for mid-range embedded vision and graphics processing in rugged, limited-power applications. The system features an 800 MHz ARM Cortex-A8 CPU, hardware graphics accelerators, and a fully customizable Spartan-6 FPGA which can be programmed with Micro/sys or third-party cores, or the user’s own IP.

Vision applications are catered for by two MIPI CSI-2 CMOS camera ports, capable of operating simultaneously to provide stereo vision. Additional connectivity features include USB2.0, serial RS232/RS485, Ethernet and a dual CAN Bus.

A factory-installed Linux image, configured to run user application programs straight out of the box, ships as standard with the SBC1654.  A Windows CE board support package is also available.

More information: SBC1654 Single Board Computer

SBC1654 Vision Computer

DKV5651 Vision Development Kit

Fully Integrated Vision Kit Speeds Development of Camera Apps for SBCs

The DKV5651 is a fully functional embedded development kit based around our SBC5651 single-board computer. The kit aims to simplify development of embedded vision applications, providing plug-and-play functionality with an included OmniVision3640 CSI camera module.

The standard DKV5651 comes with a Linux image preloaded on an SD card, allowing users to run their application programs straight out of the box. Ready-to-run video processing tools and open-source OpenCV libraries are available, and Micro/sys sample programs assist the user in implementing a wide range of image processing capabilities with minimum effort. A Windows CE board support package is also available.

More Information: DKV5651 Vision Development Kit

DKV5651 Vision Development Kit

Send an Enquiry

  • This field is for validation purposes and should be left unchanged.